Philips MCB275/05B - RDS (Radio Data System); Switching through RDS Information; Automatic Clock Setting Via RDS

English
23
Tuner
RDS
The feature RDS (Radio Data System) is a
service that allows FM stations to send additional
information along with the regular FM radio
signal. When you are receiving an RDS station,
and the station name are displayed.
Switching through RDS information
1 Tune to the desired RDS radio station on the
FM waveband (see Tuning to radio stations)
2 Press INFO./RDS on the remote control
repeatedly to switch through the following
information (if available):
– Station name
– Program type (for example: News, Sport, etc.)
– Radio text messages
– Frequency
Note:
– NO PS, NO TYPE or NO TEXT is displayed if
you press INFO./RDS and no RDS signal is
available.
Automatic clock setting via RDS
When the set is on, the clock can be
automatically set by a time signal broadcast
together with the RDS signal. This only works if
the RDS station is sending this time signal.
Note:
– The time signal broadcast from certain RDS
stations may not always be accurate.
P001-P030_MCB275_05_Eng 2007.6.13, 10:2823