Philips MCB275/05B - CD Playback Modes; Different Play Modes

English
19
CD
4 Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 32 tracks.
5 Press ÉÅ play the program.
Helpful hints:
– The set will return to the stop position if no button
is pressed within 90 seconds.
PROG disappears. To resume programming, press
SCAN/PROGRAM (or PROG on the
remote control).
– MP3: When playing a program, use of
ALBUM/ PRESET +/- (or ALB +/- on the
remote control) is void.
Erasing the program
You can erase the contents of the memory by:
● Press STOP 9
– once if in the stop position;
– twice during playback;
● Press STANDBY-ON/ ECO POWER y
● Select another sound source
● Open the CD door
➜ PROG disappears while PROGRAM CLEAR
scrolls.
Different play modes: REPEAT,
SHUFFLE
REPEAT TRACK– plays the current track
continuously.
REPEAT ALL– plays the entire disc/program
continuously.
SHUFFLE – plays all the tracks in random order.
1 During playback, press once or more REPEAT/
ST. or SHUFFLE to select play modes.
2 To return to normal playback, press REPEAT/
ST. or SHUFFLE repeatedly until the various
modes are no longer displayed.
Helpful hints:
– In the shuffle mode, press ¢ (or ™ on the
remote control) to select tracks.
Display track information
(MP3 only)
The ID3 tag is part of an MP3 file and
contains various track information such as the
track´s title or the artist´s name.
● During playback, press DISPLAY repeatedly on
the remote control.
➜ Display show title name, album name and ID3
tag information.
P001-P030_MCB275_05_Eng 2007.6.13, 10:2819