Philips MCB275/05B - Timer Functions; Setting the Timer; Activating and Deactivating Timer

26
English
Timer SLEEP
Setting the timer
The set can be used as an alarm clock, whereby
the selected source (DAB, FM, DISC or USB)
starts playback at a preset time. Make sure the
clock is set before using the timer.
1 Press and hold TIMER on the remote control.
➜ TIMER ON and the hours digits start flashing.
2 Press 4 / ¢ (or ¡ / ™ on the remote
control) repeatedly to set the hours.
3 Press TIMER to confirm.
➜ The minutes digits start flashing.
4 Press 4 / ¢ (or ¡ / ™ on the remote
control) repeatedly to set the minutes.
5 Press TIMER to confirm .
➜ TIMER OFF and the hours digits start
flashing.
6 Press 4 / ¢ (or ¡ / ™ on the remote
control) repeatedly to set the hours.
7 Press TIMER to confirm.
➜ The minutes digits start flashing.
8 Press 4 / ¢ (or ¡ / ™ on the remote
control) repeatedly to set the minutes.
9 Press TIMER again.
➜ The source mode now is available for
selection.
0 Press 4 / ¢ (or ¡ / ™ on the remote
control) repeatedly to select the wake-up
source (DAB, FM, DISC or USB).
! Press TIMER again and then press 4 / ¢
(or ¡ / ™ on the remote control) repeatedly
to set the wake-up volume.
& Press TIMER to confirm.
➜ The timer is now set and activated.
Note:
– The set will exit from the timer setting mode if
no button is pressed within 90 seconds.
Activating and deactivating
TIMER
● Press TIMER on the remote repeatedly to
activate or deactivate the timer.
➜ If activated, the last set source and start time
are displayed.
➜ If deactivated, “TIMER OFF” appears.
Helpful hints:
The timer will not work at the set time if
- the set is switched on;
- the timer is deactivated.
The set will switch to Tuner source
automatically if :
- no CD is inserted when the selected source is CD;
- no USB device is connected when the selected
source is USB.
SLEEP
You can set a certain period of time after which
the set will switch off.
● On the remote control, press SLEEP
repeatedly to select the desired time period
options (in minutes):
➜ Display shows in sequence: SLEEP OFF,
120, 90, 60, 45, 30, 15, 5, SLEEP OFF...
➜ Display shows the selected option briefly and
returns to its previous status. The icon
appears.
To deactivate the sleep timer, press
SLEEP again.
➜ The icon disappears.
or
Press STANDBY-ON/ ECO POWER to
switch off the set (or y on the remote control).
Helpful hints:
– The SLEEP function does not affect your alarm
time setting.
P001-P030_MCB275_05_Eng 2007.6.13, 10:2826