11
English
EN
Find the correct video input
channel
1 Turn on your unit.
Press
to select the disc source.
Turn on the TV and switch to the
correct video-in channel.
Note
See the user manual of your TV for how to switch
between video-in channels.
This unit is compatible with both NTSC and
PAL. If the picture is abnormally displayed with
the default setting, select a TV system that
matches your TV. (Refer to "Setup" > "Video
Setup" > for details)
screen display
setting. (See "Setup" > "General Setup" >
for details)
Caution
Risk of damage to the unit! During play, never move
the unit.
Never put any object other than a disc into the disc
compartment.
Never look at the laser beam inside the unit.
Never play discs with accessories such as disc stabilizer
rings or disc treatment sheets.
The listed operations are applicable for all
supported media.
Function
Stop play Press
.
Pause or resume play Press
.
Skip to the previous/next title,
Press
/ .
Play a disc
1 Press to select the disc source.
Press on the main unit to eject the disc
tray.
Place a disc onto the disc tray with the
printed side upward, and then press
.
The unit starts playing automatically.
To start the play manually, press
.
To play a DVD that has a rating level
higher than your setting, enter the
MCD1065_51_UM_V1.0.indb 11 2012-2-27 17:43:13
To Next Page
Loading...
