17
English
EN
1 Press button.
Select to access the setup menu.
Select to access the
options.
: Select an audio language for video.
: Select a subtitle language for
video.
: Select a menu language for a
video disc.
: Set the rating level
to a disc. Restrict access to discs that are
encoded with ratings These discs must be
recorded with rating levels.
:Display or skip the content menu
for VCD and SVCD.
: Set or change a password to
play a restricted disc.
:Select the language of the
DivX.
:Display the software version.
:Reset the home theater to the
default settings programmed at the factory.
Note
the movie is ‘Movie.avi’, then you need to name the text
This unit can be used as a timer. The disc/tuner/
USB is activated to play at a preset time.
Note
Make sure that you have set the clock correctly.
1 In standby mode, press and hold
until (timer set) scrolls
on the display.
»
scrolls on the display.
Press , or , or TUNER to select
a source.
Press
» The clock digits are displayed and
begin to blink.
Press / or to set hour, then
press
» The minute digits are displayed and
begin to blink.
5 Press / or to set minute,
then press
» (volume) is displayed and begins
to blink.
6 Press / or to adjust volume,
then press
» The timer is set and activated, and
is
displayed.
Tip
Minimum volume and maximum volume can be set,
volume 1 to volume 31 can be adjusted.
MCD1065_51_UM_V1.0.indb 17 2012-2-27 17:43:22
To Next Page
Loading...
