11
Connect TV
Connect video cables
With this connection, you can watch video from
the unit on the TV screen.
You can select the best video connection that
your TV supports.
Option 1: Connect through SCART (for a
standard TV).
Option 2: connect through component
video (for a standard TV or Progressive
Scan TV).
Option 3: connect through S-Video (for a
standard TV).
Option 4: connect through composite
video (CVBS) (for a standard TV).
Option 1: Connect through
component video
Connect a progressive scan TV through
TV
Pr/Cr Pb/Cb Y
COMPONENT VIDEO IN PUT
8
1
2 Insert the stripped part of the wire
completely.
Insert the right speaker wires to “R”,
left speaker wires to “L”.
Insert the red wires to “+”, black wires
to “-”.
3
Connect FM antenna
Tip
For optimal reception, fully extend and adjust the
position of the antenna.
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL jack.
The unit does not support MW radio reception.
1 Connect the supplied FM wire antenna to
the FM AERIAL socket on the unit.
abc
8
English
EN
To Next Page
Loading...
