EasyManua.ls Logo

Philips MCD122 - Decoder Board Layout Diagram

Philips MCD122
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
10 Product
information
Note
Product information is subject to change without prior
notice.


Rated Output Power 2X20W RMS
 20 -20000 Hz, ±3dB
Signal to Noise Ratio >67dB
Aux Input 1 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Video Decoding MPEG-1 / MPEG-2 /
DivX
Video DAC 12Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N >48dB
Audio DAC 24Bits / 96kHz
Total Harmonic
Distortion
<1% (1 kHz)

Response
4Hz - 20kHz (44.1kHz)
4Hz - 22kHz (48kHz)
4Hz - 24kHz (96kHz)
S/N Ratio >67dBA
 For audio players with headphone
sockets:
Connect a 3.5mm audio cable (not
supplied) to the MP3 LINK socket
and to the headphone socket on the
audio player.
2 Select the MP3 Link/AUX source.
3 Start play on the audio player.
Record to a digital recorder
You can record audio from this unit to a digital
recorder.
1 Connect a coaxial cable (not supplied) to:
 the COAXIAL socket
 the digital input socket on the digital
recorder
2 Play audio to be recorded.
3 Begin to record on the digital recorder
(see the digital recorder user manual).
8
EN

Other manuals for Philips MCD122

Related product manuals