EasyManua.ls Logo

Philips MCD122 - Power Board Layout Diagram

Philips MCD122
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
 [All] – If the connected device supports
multi-channel audio formats, select this
option.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
 [On]
only).
 [Off] – enjoy surround sound with its full
dynamic range.
Video setup
On the [Video Setup] page, you can set the
following options:
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
 [NTSC] - For TV with NTSC color system.
 [PAL] - For TV with PAL color system.
 [Multi] - For TV that is compatible with
both PAL and NTSC.
[TV Display]
The TV format determines the aspect ratio of
display according to the type of TV you have
connected.
 [4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
 [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on the
top and bottom of the screen.
 [Wide Screen] – For wide-screen TV:
display ratio 16:9.
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)
6 Adjust settings
1 Press SYSTEM MENU.
2 Select a setup page.
3 Select an option and then press .
4 Select a setting and then press OK.
 To return to the previous menu, press
.
 To exit the menu, press SYSTEM
MENU.
General setup
On the [General Setup] page, you can set the
following options:
[OSD language]
Select the preferred language for on-screen
display.
[DivX® VOD Code]
Display the DivX® registration code.
Tip
Enter this DivX registration code when you rent or
purchase video from http://vod.divx.com/. The DivX
videos rented or purchased through the DivX® VOD
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
On the [Audio Setup] page, you can set the
following options:
[Digital Output]
Select audio formats supported by the
connected device.
 [Off]Turn off the digital output.
 [PCM] – If the connected device cannot
decode multichannel audio, select this
option.
English
EN

Other manuals for Philips MCD122

Related product manuals