Philips MCD135 - Connecting USB Device; Power Connection

9EN
1 Connect the component video cables to:
• the Y Pb/Cb Pr/Cr sockets on this
product.
• the component input sockets on the
TV.
2 Connect the audio cables to:
• the L and R sockets on this product.
• the audio input sockets grouped with
the component input socket that is
mentioned in step 1.
Connect a USB storage
device
Note
•
For the best data transmission, use the supplied USB
cable only.
1 Connect the supplied USB cable to:
• the
jack on the main unit.
• the plug of your USB storage device.
Connect power
Note
•
Where the MAINS plug or an appliance coupler is used
as the disconnect device, the disconnect device shall
remain readily operable.
• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the main unit.
• Before you connect the AC power cord, make sure that
you have complete all other connections.
• Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the points where they exit from the apparatus.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
1 Connect the AC power cord to
• the AC MAINS socket on this product.
• the power supply.