15EN
7 Other features
Listen to FM radio
Note
•
A maximum of 10 radio stations can be stored.
• Fully extend the FM antenna for better reception.
Program radio stations automatically
1 Press TUNER.
2 Press and hold ANGLE/PROG for 2
seconds.
»
AUTO
blinks.
» Available stations are programmed.
» The rst programmed radio station is
broadcast automatically.
Program radio stations manually
1 Press TUNER.
2 Press / repeatedly to tune to a
radio station.
3 Press ANGLE/PROG.
» The sequence number blinks with the
current frequency displayed.
4 Press / to allocate a sequence
number from 01 to 10 to this radio station.
5 Press ANGLE/PROG to conrm.
» The sequence number and the current
frequency are displayed.
6 Repeat steps 2-5 to program more
stations.
Note
•
To overwrite a programmed station, store another
station with its sequence number.
Tune to a programmed radio station
1 Press TUNER.
2 Press / (or / ) repeatedly to
select a programmed radio station.
Play audio from an external
device
You can use this player to play audio from an
external device.
1 Connect the MP3 link cable to
• the MP3 LINK jack of this player
• the audio output jack (usually
headphone jack) of the external
device.
2 Press MP3-LINK.
3 Play the external device (see the user
manual of this device for details).
Listen through headphone
Plug a headphone into the socket.
Turn on/off automatically
You can set a time for automatic power on and
off.
Note
•
Make sure that you have set the clock before this setup.
1 In standby mode, press and hold SLEEP/
TIMER.
»
(time for auto power on)
blinks.
2 Press SLEEP/TIMER.
» The hour digits blink.
3 Press / to set the hour.
To Next Page
Loading...
