Philips MCD135 - Product Specifications; Technical Specifications

19EN
9 Product
information
Note
•
Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 2 X 25 W RMS
Frequency Response 40 Hz - 20000 Hz,
±3 dB
Signal to Noise Ratio > 65 dB
Aux Input 500 mV RMS 600
ohm
Disc
Laser Type Semiconductor
Disc Diameter 12 cm/8 cm
Video Decoding MPEG-1 / MPEG-2 / DivX
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N > 48 dB
Audio DAC 24 Bits / 96 kHz
Total Harmonic
Distortion
< 0.8% (1 kHz)
Frequency
Response
4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 24 kHz (96 kHz)
S/N Ratio > 65 dBA
Video Resolution 720 X 480 X 30;
720 X 576 X 25
Tuner (FM)
Tuning Range 87.5 - 108MHz
Tuning grid 50KHz
Sensitivity - Mono,
26dB S/N Ratio
<22 dBf
Sensitivity - Stereo,
46dB S/N Ratio
<43 dBf
Search Selectivity >28dBf
Total Harmonic Distortion <2%
Signal to Noise Ratio >55dB
Speakers
Speaker
Impedance
6 ohm
Speaker Driver Full range speaker
Sensitivity > 80 dB/m/W±4dB/m/W
General information
AC power 110 - 240 V~, 50/60 Hz
Operation Power
Consumption
25 W
Eco Standby Power
Consumption
< 1 W
Composite Video
Output
1.0 Vp-p, 75 ohm
Headphone output 2 X 15 mW, 32 ohm
USB Direct Version 2.0
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
152 X 170 X 210 mm
152 X 170 X 200 mm
Weight
- With Packing
- Main Unit
5.3 kg
3.9 kg