Philips MCD135 - Getting Started; Powering On; Setting the Clock; Selecting TV Input Channel

10 EN
5 Get started
Turn on
1
Press .
» The player switches to the last selected
source.
• To switch this player to standby mode,
press
again.
Note
•
If no source is played within 15 minutes, the player
switches to standby mode.
• If no operation is performed within 15 minutes in
standby mode, the player switches to eco power
standby mode.
Set the clock
The player uses the 24-hour time format.
1 In standby mode, press and hold DISPLAY/
CLOCK for 2 seconds.
» The hour digits blink.
2 Press / to set the hour.
3 Press DISPLAY/CLOCK again.
» The minute digits blink.
4 Press / to set the minute.
5 Press DISPLAY/CLOCK to conrm the
setup.
Find the correct video input
channel
1
Turn on the player.
2 Press DISC to select the disc source.
• Turn on the TV and switch to the
correct video-in channel.
Note
•
See the user manual of your TV for how to switch
between video-in channels.
Select the correct TV system
This player is compatible with both NTSC
and PAL. If the picture is abnormally displayed
with the default setting, select a TV system that
matches your TV. (Refer to "Setup" > "System
setup" > [TV SYSTEM] for details)
Select a language for on-
screen display
English and Russian are the default language
options for this setting. (See "Setup" >
"Language setup" > [OSD LANGUAGE] for
details)