Philips MCM103 - Repeat Play; Random Play; Program Tracks

13
Program tracks
You can program a maximum of 40 tracks.
1 At CD/USB mode, in the stop position,
press PROG to activate the program
mode.
[PROG] (program) blinks on the »
display.
2 For MP3/WMA tracks, press ALB/
PRESET+/- to select an album.
3 Press / to select a track number, then
press PROGWRFRQÀUP
4 Repeat steps 2 to 3 to select and store all
tracks to program.
5 Press to play the programmed tracks.
During play, [PROG] (program) is »
displayed.
To erase the program, in the stop 
position, press
.
Repeat play
Play a track repeatedly
1 During play, press REP.
[REP] (repeat) is displayed: the current »
track is played repeatedly.
2 To return to normal play, press REP again.
Play all tracks or an album repeatedly
1 During play, press REP ALL repeatedly to
select:
[REP ALL] (repeat all) is displayed: all »
tracks are played repeatedly.
[REP ALB] (repeat album) is displayed »
(for MP3 and USB only): the current
album is played repeatedly.
2 To return to normal play, press REP ALL
repeatedly until repeat mode is no longer
displayed.
Random play
1
Press SHUF.
>6+8)@VKXIÁHLVGLVSOD\HGDOOWUDFNV»
are played randomly.
2 To return to normal play, press SHUF
again.
Tip
7KHUHSHDWDQGVKXIÁHIXQFWLRQVFDQQRWEH
activated at the same time.
English
EN