Hardware Tests
MCP9350i 11. EN 35
9. Indicate that you want to install a set top box.
10. The Which Tuners Do You Want to Confiure? screen will appear. Select NVIDIA NVTV Dual Tuner Card Tuner 1 (the upper
Composite and S-Video connectors).
11. Select Enter Channel and enter a channel number that should be available. Check if you can see the expected TV signal in the
small video window on the right.
12. Select Composite Video. Check for the expected Composite Video signal in the video window.
13.
Disconnect the Composite Video cables from the MCP9350i. Connect the S-Video source to the upper connector on the back
panel.
14.
Select
S-Video
. Check for the expected S-Video signal in the video window, if necessary click
Scan again
to refresh the display.
15. Move the S-Video cable to the lower connector on the MCP9350i back panel.
To Next Page
Loading...
