Do not let water hotter than 65°C run through the water purier at
this setting, as this may damage the water purier.
Select this setting for a strong water ow.
1 Turn the water selection lever until the unltered stream symbol is
aligned with the indicator (Fig. 22).
Do not let water hotter than 65°C run through the water purier at
this setting as this may damage the water purier.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the water purier. These substances
may cause cracking, discolouration or distortion.
1 Clean the water purier with a damp cloth.
New lter cartridges are available under type number WP3911.
Replace the lter cartridge if it is clogged to prevent damage to the
water purier.
1 For optimal performance of the water purier, replace the lter
cartridge if either of the following situations occurs:
You have used the lter cartridge for six months.
The hollow bre of the lter cartridge (visible through the cartridge
window) has turned rust brown or dark grey (see section ‘Cartridge
replacement indicator’).
The volume of puried water decreases substantially.
The ltered water still has an unpleasant smell or is still turbid
after purication.
2 To change the lter, close the tap and set the water selection lever
to the unltered stream position. (Fig. 22)
12
To Next Page
Loading...
