2 DETT - Instructions for Use
24
Log Files
The communication between the DETT and the Patient Monitor is logged in the selected log path. A
log file is created each time the data export communication is started (refer to chapter "Start" for more
details on how to start).
The file name is built in one of the following ways:
1 Monitor connected to LAN Interface:
DevIfTest_<Date>_<Time>_<Bed Label>_<MAC Addr>.txt
2 Monitor connected to COM Interface:
DevIfTest_<Date>_<Time>_<COM No.>_<Baud rate>.txt
The log files contain the communication data in hexadecimal code. Each data package is preceded by a
header with a time stamp and a communication type as shown in the following example:
To Next Page
Loading...
