Need help?Do you have a question about the Philips pm3232 and is the answer not in the manual?
Introduction to the oscilloscope's intended use, features, and transistorized design.
Detailed specifications for the electron beam tube, amplifiers, time-base, and triggering.
Lists standard and optional accessories, including probe sets and adapters.
Instructions for setting up the oscilloscope, including power connection, voltage selection, and grounding.
Explains the front panel controls, sockets, and their functions for operation.
Explanation of the oscilloscope's main functional blocks: Y-axis, triggering, time-base, X-axis, and CRT.
A brief guide for checking and adjusting the oscilloscope's main functions and channels.
Detailed description of the vertical amplifier, input coupling, attenuator, and trigger pick-off stages.
General| Display Type | CRT |
|---|---|
| Bandwidth | 20 MHz |
| Channels | 2 |
| Input Sensitivity | 5 mV/div to 20 V/div |
| Vertical Sensitivity | 5 mV/div to 20 V/div |
| Input Impedance | 1 MΩ // 30 pF |
| Max Input Voltage | 400 V (DC + AC peak) |
| Trigger Source | Line |
| Display | 8 x 10 div |
| Power Supply | 50/60 Hz |
| Trigger Modes | Auto, Normal, Single |
To Next Page
