Philips MRV640 - Page 58

Diagnostic Software
EN 58 DVDR615, MRV6405.
121802 The IIC write failed
121803 The IIC read failed
121804 There was no response from the analogue board.
121805 No DS errCode known for analogue board error:
Example DS:> 1218
121800: The slash version is: 82
Test OK @
Nucleus Name DS_SYS_Virginize
Nucleus Number 1219
Description (Re-) Virginize the recorder. User data in the NVRAM of the analogue board is
cleared
Technical - Issue the command to return to the factory defaults to the analogue board
- Wait for the result and return this to the user
Execution Time 1 second.
User Input None
Error Number Description
121900 Virginization succeeded
121901 Virginization on the Analogue Board failed.
121902 The returned errorcode from the analogue board is un-
known:
121903 No DS errCode known for analogue board error:
121904 There was no response from the analogue board.
Example DS:> 1219
121900:
Test OK @
Nucleus Name DS_SYS_VirginModeOn
Nucleus Number 1220
Description Turn on the virgin mode functionality (e.g. the auto channel search upon start-up)
Technical - Issue the command to set the bit for the virgin mode to the analogue board
- Wait for the result and return this to the user
Execution Time Less than 1 second.
User Input None
Error Number Description
122000 Turning on the virgin mode succeeded
122001 Turning on VirginMode on the Analogue Board failed.
122002 The returned errorcode from the analogue board is un-
known:
122003 No DS errCode known for analogue board error:
122004 There was no response from the analogue board.
Example DS:> 1220
122000:
Test OK @
Nucleus Name DS_SYS_VirginModeOff
Nucleus Number 1221
Description Turn off the virgin mode functionality (e.g. the auto channel search upon start-up)
Technical - Issue the command to reset the bit for the virgin mode to the analogue board
- Wait for the result and return this to the user
Execution Time Less than 1 second.
User Input None
Error Number Description
122100 Turning off the virgin mode succeeded
122101 Turning off VirginMode on the Analogue Board failed.
122102 The returned errorcode from the analogue board is un-
known:
122103 No DS errCode known for analogue board error:
122104 There was no response from the analogue board.
Example DS:> 1221
122100:
Test OK @