25
English
Disc Operations
4 Press S / T or use the numeric
keypad (0-9) to enter the track number.
5 Press OK to store the track.
6 Repeat steps 4~5 to select other
tracks.
7 Press ÉÅ to start programme playback.
➜ Only the tracks programmed from
audio CDs will play.
8 Press Ç to stop playback or exit
programme mode.
Helpful Hint:
– If you do not press any buttons within 20
seconds, the system will exit programming
mode.
Clearing the programme
● Stop playback, then press Çagain.
➜
PROG disappears from the display panel
and "PROGRAM CLEARED" appears.
To Next Page
Loading...
