Philips NTRX900SB - Connect; Connect FM Antenna; Connect am Antenna; Connect Speakers

9EN
3 Connect
Connect FM antenna
Connect the supplied FM antenna to the FM
jack on the back of the main unit.
Connect AM antenna
Note
• For better reception, adjust the position of the AM
antenna.
1 Assemble the AM loop antenna.
2 Connect the AM loop antenna to the AM
jack on the back of the main unit.
Connect speakers
Note
• For optimal sound quality, use the supplied speakers only.
• Connect only speakers with impedance that is the
same or higher than the supplied speakers (refer to the
"Specications"sectionofthismanual).
• Make sure that the colors of the speaker wires and
terminals are matched.