Philips OTT2000 - Playing Audio Sources

10 EN
4 Play
Play a disc
1
Press SOURCE repeatedly to select CD
source.
2 Press to open the disc compartment.
3 Insert a disc with the printed side facing up,
and then close the disc compartment.
4 Play starts automatically. If not, press .
Pause/resume play
• During play, press to pause/resume
play.
Skip to a track
For CD:
• Press
/ to select another track.
For MP3 disc and USB:
1 Press PRESET/ALBUM / to select an
album or a folder.
2 Press / toselectatrackorale.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Program tracks
Note
•
You can program tracks only when the play stops.
• You can program a maximum of 20 tracks.
1 In playback stop mode, press CLOCK/
PROG to activate the program mode.
» [MEMORY] (memory is displayed on
the screen.
2 For MP3 tracks, press / to select an
album.
3 Press / to select a track, then press
CLOCK/PROGtoconrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
• To erase the program, in the stop
position, press
.
• The program mode stops automatically
if no button is pressed for about 10
seconds.
Display play information
During playback, press and hold INFO.
• For CD:
• Lap time of current track
• Lap time remaining of current track
• Total lap time of all tracks
• Total lap time remaining of all tracks
• For MP3 disc and USB: ID3 information,
such as [TITLE](title),[ARTIST](artist),
[ALBUM](album).
Search tracks
You can search a track by title or folder name
within a disc/USB.
Note
•
ForMP3les,thebitratesfrom32kbpsto320kbps
are supported.