Philips OTT2000 - Record to Usb

13EN
Record to USB
Plug the USB storage device into the
socket of this device.
1 Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• AUX IN - Select the Phono /Aux
source, then connect and start to play
an external device.
• Phono - Select the Phono /Aux source,
then play the vinyl record.
• Bluetooth - Select the Bluetooth
source and play the tracks.
2 Press REC to start recording.
• For CD discs, press
REC repeatedly
to select:
A [REC_ONE](recordone):therst/
current track is recorded.
B [REC_ALL](recordall):alltracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
• To stop recording, press
.
Note
•
If the USB storage device does not have enough
memorytostoretheaudioles,amessageaboutafull
memory is displayed.
• For CD disc, recording process is completed only when
the entire track is recorded.
• ForMP3discs,thesystemcopieslestotheUSB
storage device if
REC is pressed.
Cut a le
WhenyourecordaudiolesfromBluetooth/
AUX/PHONO/FM to a USB storage device,
youcancutalebypressingFIND/FILE CUT
duringrecording.Anewaudioleisgenerated
and recording continues.
Delete le from USB
1 In playback stop mode, press SOURCE
repeatedly to select USB source.
2 Press INFO/ DELETE.
» DEL -- 001 is displayed in the screen.
3 Press / toselecttheletobe
deleted.
4 Press DELETEtoconrm.
• Toexitledeletionmode,press
.