EasyManua.ls Logo

Philips PI3910B2 - 3 Get Started; Charge Power; Conserve Battery Power; Switch the Device on or off

Philips PI3910B2
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7EN
3 Get started
Charge power
PI3910 has a built-in battery that can be
charged through the USB connector of the
supplied USB power adapter.
The rst time you use PI3910, charge PI3910
for more than 5 hours.
By using the USB cable, connect
PI3910 to the supplied USB power
adapter.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Conserve battery power
To conserve battery power and increase
the play time, do the following:
Use the sleep mode
After the selected time duration, PI3910 goes
to the sleep mode, and the screen switches
off automatically. To save battery power, do the
following:
Go to > Display > Sleep to set the
screen-off timer to a low value.
To switch off Wi-Fi during the sleep mode,
a Go to > Wi-Fi.
b At the top bar, select > Advanced
> Keep Wi-Fi on during sleep. Select
Never.
Switch the device on or off
Press and hold the power/ lock button until the
device is switched on or off.

Table of Contents

Related product manuals