7-1 PL22.06-A_FW
FIRMWARE RENEWAL MODE
Equipment Required
a. Remote Control Unit
Environment Required
a. TV connect to internet
Firmware Update Procedure
1. Turn the power on.
2. Press [ (HOME)] button on the remote control
unit.
3. Press [OPTIONS] button display Settings side
menu.
4. Select “Device Preferences” by CURSOR buttons
and press [OK] button.
5. Select “About” by CURSOR buttons and press
[OK] button.
6. Select “System update” by CURSOR buttons and
press [OK] button.
7. Proceed the updating according to the instruction
displyed at the screen.
To Next Page
Loading...
