Switching Bandwidth
Frequency band coverage without retuning
UHF TM 40MHz, U0 30MHz, W 1 30MHz, W4 20MHz
VHF A9/B0 band 30MHz
VHF E0 band 20MHz
Channel Capacity
i) 9-channel
ii) 64-channel Current Consumption
VHF
UHF
Off state less than 10mA less than 350mA
Rx standby less than 10mA less than 350mA
(no AF output)
Tx (25W) less than 5.5A less than 6.5A
Type Approval Compliance
The PMR80 is designed to comply with the following regulatory specification standards.
i) Australian DOC RB206, RB207, RB234B
ii) New Zealand RTA25
III) Canada RS119
iv) European CEPT TR24-01 Annex 1,2,5,7
MPT 1306, MPT 1316, MPT 1326.
v) EIA RS 15213, RS204C. (Does not comply with squelch
sensitivity
17.0, or Temp range 22.0).
vi) FTZ A446 82023, AA446 82024.
Dimensions
Length; 203mm (210mm including Volume knob). 160mm.
Width; 160mm.
Height; 45mm.
Weight; less than 1.4kg (including cradle).
Section 2 Page 2
To Next Page
Loading...
Need help?
General
