(vii) Lead-in-Delay.
0 to 65Sec. Accuracy greater than 1%.
(viii) Lead-out-Delay.
0 to 255mSec. Accuracy greater than +0, -1 mSec.
(ix)Send Repeat Rate.
Approx 100mSec following end of transmission. Additional send keystrokes are
ignored during encode.
(x)Code Formats.
Up to 10 tones per sequence.
2.4.1.2 Decoder
(i) Sinad Sensitivity.
For 90% decode success rate sinad is measured at speaker output.
1. Standard Selcall.
20mSec 14dB Sinad
40mSec 15dB Sinad
l00msec 13dB Sinad
255mSec l4dB Sinad
2 Enhanced Selcall.
20mSec TBA
40mSec TBA
100mSec TBA
255mSec TBA
(ii) Deviation Sensitivity.
Minimum deviation for 90% success rate and full receiver quieting.
1 Standard selcall.
Less than 0.3kHz deviation.
2. Enhanced selcall.
TBA.
(iii) Decode Bandwidth.
80% deviation and full quieting.
CCIR 1.5% to 3 %
ZVEI 2.0% to 4.5%
EEA 1.5 % to 3.5 %
EIA 1.5 % to 3.5 %
DZVEI 2.0% to 4.5%
NATEL1.3% to 1.7%
Section 2 Page 6
To Next Page
Loading...
Need help?
General
