EasyManua.ls Logo

Philips PRM80 Series - Page 28

Philips PRM80 Series
79 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(ii) Software RTB.
RTB phase shift: 180 degrees +/- 10 degrees, lagging.
RTB duration: between 80mSec to 150mSec.
CTCSS tone frequency dependent. See Table 2.1
RTB amplitude variation 0.5dB.
(across CTCSS tone set).
2.4.2.3 Decoder
(i) Tone-Set.
as per Encoder.
(ii) Bandwidth.
+/- 3.0% max.
(iii) Deviation Sensitivity.
Better than 6% of system deviation (for decode with full RF quieting).
(iv) Noise Immunity.
Less than 500mSec dropout per minute for l0dB sinad
(CTCSS tone deviation 10% of system and sinad signal of 60% deviation at
1kHz).
(v) False Decode Rate.
Less than 5 false decodes per minute (no carrier input).
(vi) Talkoff.
I nterfering tone deviation for loss of decode (CTCSS tone deviation 10% of
system).
Full quieting RF signal: 310Hz to 3kHz 90% of system deviation (for no
dropouts).
20dB sinad RF signal: 320Hz to 3kHz ; 90% of system deviation (for no
dropouts in one minute).
12dB sinad RF signal: 350Hz to 3kHz; 90% of system deviation (for no dropouts
in one minute).
(vii) Response Time; Less than 250mSec.
(With a full quieting signal of 67Hz at 10% of system
deviation; 67Hz gives the slowest times).
(viii) De-response time; Less than 250mSec.
2.4.2.4 Speech Rejection Filter
(i) Response.
300 Hz0 dB.
250 Hz<-36 dB.
Section 2 Page 8

Table of Contents

Related product manuals