4. Advanced operation
4.12 Back illu mination
About the back illumination
By default, when the monitor is powered, the circle disc on the back of the monitor will illuminate. This
illumination can be disabled in the OSD menu.
To enable/disable the back illumination
1. Bring up the OSD main menu.
2. Navigate to the Settings > Back illumination menu.
3. Select On to enable or Off to disable the back illumination.
Info
Image
Settings
OSD Position
OSD Timeout
OSD Lock
Factory Reset
DVI1 5V
DVI2 5V
5V Output
Back Illumination
Center
240 sec.
Off
Off
Off
Off
Off
Image 4-14
K5902096 (451920611523) PS24FHDCR 08/03/2018 21
To Next Page
Loading...
