Philips RC759 RDS - Page 18

INITIALIZATION SUBMENU
nguage (if no navigation system is connected): Choose the language of the display
dings, (if a navigation system is connected), see ‘NAVIGATION MENU’ option ‘Settings’.
elect ‘IN’ when you also wish to amplify the received voice through the car speakers. Select ‘NONE’ if no
phone i is connected to the set.
lephone signal: Adjust according to your telephone mute signal (‘LOW’ in most cases). ©
:ep type: Select the type of confirmation beeps.
ep fevel: Adjust the volume of the beeps.
Suidance level (if navigation system is connected): Adjust the volume difference
the spoken guidance messages.
ock settings: To adjust the time.
k type: Select an internal clock (INT) or a clock which is automatically updated via RDS
a GPS (only if a navigation system is connected).
ck format: Select the desired clock format.
ir (if an internal clock type): Adjust the hours.
te (if an internal clock type): Adjust the minutes.
mer time (if a GPS clock type): Add/subtract an hour.
1ezone (if a GPS clock type): Determine the time difference with London
wich Mean Time.
can time: Select how many seconds the set scans one station or track.
n-off logic: Activate to limit the use of the set to one hour after you have removed the car ignition key.
arning light: Activate to switch on the flashing red light when the detachable front is removed.
contrast: Adjust the contrast of the display.
emote control (Le Mouse): Activate to ide a Philips remote control (if connected).
udspeaker test: Test the loudspeaker connections and their positioning. Switch the set off to end
test session.
18
lephone: Select ‘MUTE’ to automatically interrupt the set's sound output when using your car phone.