Philips SB300B/00 - Controlling Phone Calls; Reconnecting and Disconnecting Devices

6EN
Control your phone call
After Bluetooth connection, you can
control an incoming call with this
speaker.
Button Function
Press to answer an
incoming call.
Press and hold for three
seconds to reject an
incoming call.
During a call, press to end
the current call.
During a call, press and
hold for three seconds to
transfer the call between
your mobile device and the
speaker.
Note
• Music play pauses when there is an
incoming call, and resumes when your
phone call ends.
Reconnect a device
• When you turn on the speaker,
it tries to reconnect the last
connected device automatically;
• If not successful, select [Philips
SB300] on your Bluetooth menu to
start reconnection.
Disconnect a device
• Press and hold for three seconds;
• Turn o the speaker;
• Disable Bluetooth on your device;
or
• Move the device beyond the
communication range.
Connect another device
1 Press and hold for three seconds
to disconnect the currently
connected device.
» The speaker enters Bluetooth
pairing mode.
2 Connect another Bluetooth device.
Clear Bluetooth pairing
information
Press and hold for ten seconds to
clear Bluetooth pairing information.