User Guide
18
Programming a button per device
1 Switch to the device for which you want to program the button.
2 Complete instructions 2 to 7 in “Programming control panel buttons” on
page 16. Instead of tapping a button on the touchscreen, press the
button you want to program.
The label of the button you have pressed (e.g. chan+ or left) starts flashing on
the Remote Control icon.
Getting the maximum out of it
3. Labeling Buttons and Menu Items
The following elements can be labeled: control panel buttons, Device menu items,
macros, macro groups and Left/Right buttons.
You cannot label Home menu buttons directly. You have to label them via the
Device menu (see p. 20).
Labeling a button
1 Navigate to the panel containing the button you want to label.
2 Switch to Label mode via the Mode button .
3 Tap the button you want to label.
The display shows a “virtual auto-zooming” mini-keyboard. The button you
want to label is displayed above the keyboard.
To Next Page
Loading...
