User Guide
25
Recording macros
1 Tap the Macro menu button .
2 Open the macro menu and select a macro group.
3 Switch to Edit mode via the Mode button .
Empty macro buttons appear in the macro control panel.
4 Tap the button you want to use for your macro.
5 Enter the sequence of commands you want to record.
You can navigate to whatever control panel you want, just as you do in Use
mode.
6 Tap the Macro menu button.
The contents of the macro appear. You can now play, edit or close the macro.
7 Press the Left button to close the macro.
A confirmation screen appears where you can save or cancel the macro.
8 Tap Save and assign a label to the macro.
The macro is ready to be used.
There are two extra commands you can record in a macro:
Getting the maximum out of it
To Next Page
Loading...
