Philips SCD560 - Temperature

17
7.7 Temperature
A baby sleeps comfortably at a temperature
between 16°C/61°F and 20°C/68°F. You can set a
minimum and a maximum temperature range. You
can also set a temperature alert to warn you that
the temperature is outside the set range.
1 Select ‘Temperature’ in the menu with the +
and - buttons and press OK to conrm.
2 Select ‘Temp Range’ with the + and - buttons
and press OK to conrm.
• The minimum temperature indication starts
ashing on the display.
3 Use the + and - buttons to set the minimum
temperature range between 10°C/50°F and
19°C/66°F. Press OK to conrm.
• The maximum temperature indication starts
ashing on the display.
4 Use the + and - buttons to set the
maximum temperature range between
22°C/72°F and 37°C/99°F. Press OK to
conrm.
5 Select ‘Alert’ with the + and - buttons. Press
OK to conrm and to start setting the
temperature alert.
• The message ‘Alert’ appears on the display.
6 Select ‘Alert ON’ or ‘Alert OFF’. Press OK to
conrm.
• If you choose ‘Alert On’, the temperature
alert symbol appears on the display.
7 Select ‘Temp Scale’ with the + and - buttons.
Press OK to conrm and to start setting the
temperature scale.
8 Select ‘Celsius’ or ‘Fahrenheit’ and press OK to
conrm.
• The temperature in the set scale appears
on the display.
• The timer symbol appears on the display.
• The timer starts counting down.
6 When the timer has reached 00:00, the feed
timer alert goes off, the timer symbol starts
ashing on the display and the message
‘TIMER END’ scrolls across the display.
7 Press any key to stop the alert. If you do not stop
the alert, it stops automatically after 2 minutes.
7.6.2 Repeat the feed timer
1 After step 5 in ‘Setting and using the feed
timer’, select ‘Repeat’ with the + and - buttons.
Press OK to conrm.
2 Choose ‘Repeat ON’ or ‘Repeat OFF’ and
press OK to conrm.
3 Select ‘xx:xx Start’ with the + and - buttons
and press OK to activate the feed timer
repeat function.
4 When you press any key to stop the feed
timer alert or if the alert stops automatically
after 2 minutes, the feed timer starts counting
down again.
7.6.3 Stopping the timer
1 Press the menu button and select ‘Feed Timer’.
2 Use the + and - buttons to select ‘Stop’ and
press OK to conrm.
ENGLISH