Philips SCD560 - Parent Unit Setup and Charging

4 Then push down the lid until the lock closes
with a click.
3.2 Parent unit
The parent unit runs on two rechargeable
batteries that are supplied with the baby monitor.
3.2.1 Inserting the rechargeable batteries
1 Slide the lid of the compartment for the
rechargeable batteries off the parent unit.
2 Insert the rechargeable batteries.
D
Note:
Make sure the + and - poles of the batteries
point in the right direction.
5
1 Push the lock to release the lid of the
compartment for non-rechargeable batteries
and remove the lid.
2 Insert four non-rechargeable batteries.
D
Note:
Make sure the + and - poles point in the right
direction.
3 To reattach the lid, rst insert the lugs into the
openings in the rim of the compartment for
non-rechargeable batteries.
ENGLISH