What to do if Philips SCF395/16 has low suction?
If your Philips Breast Pump has low suction, first try increasing the suction level. Check that the silicone diaphragm and white valve are correctly assembled. Also, inspect all parts of the pump for correct assembly and ensure the pump is properly positioned on your breast to create a good seal.
How to reduce pain when using Philips Breast Pump?
To reduce pain while using the Philips Breast Pump, ensure you choose a suction level that feels comfortable. Check the silicone diaphragm for any damage like cracks or holes. Also, make sure your nipple is centered within the cushion. If the pain continues, it's best to stop and consult a breastfeeding advisor.
What to do if the silicone tube is too loose on my Philips Breast Pump?
If the silicone tube is too loose on your Philips Breast Pump, replace the silicone tube connector.
Why is the suction too strong on my Philips SCF395/16?
If the suction of your Philips Breast Pump feels too strong, try lowering the suction level. When you first start expressing, begin with the default suction level (level 5 in stimulation mode, level 11 in expression mode) and adjust as needed. Remember that different levels may feel more comfortable during different sessions. Always use the parts specifically provided with your breast pump. Check the silicone diaphragm for damage like cracks or holes.
How to relieve pain when using Philips SCF395/16?
If you experience pain while using the Philips Breast Pump, first, choose a suction level that feels comfortable. Check the silicone diaphragm for any damage like cracks or holes. Ensure your nipple is centered in the cushion. If the pain continues, stop using the pump and consult your healthcare provider.
What to do if all indicator lights are flashing on Philips SCF395/16 Breast Pump?
If all indicator lights on the motor unit are flashing and the device shuts off automatically, try to switch on the motor unit again. Also, check if you are using the adapter that was supplied with the device.
What to do if my Philips SCF395/16 does not switch on?
If the Philips breast pump does not switch on (indicator lights do not go on), check if you are using the adapter that was supplied with the device and that the adapter is connected correctly to the motor unit and wall socket. You can also try connecting the adapter to another wall socket to see if the breast pump can be switched on.
What to do if I do not feel any suction from my Philips Breast Pump?
If you're not feeling suction with your Philips Breast Pump, first try a higher suction level. Then, check if the silicone diaphragm and white valve are correctly assembled. Also, make sure all parts are intact and properly assembled. Ensure the pump is positioned correctly on your breast to create a seal.
Why is the suction level too low on my Philips SCF395/16 Breast Pump?
If you're not feeling enough suction with your Philips Breast Pump, try increasing the suction level if possible. Check that the silicone diaphragm is correctly assembled. Also, check that the white valve isn't damaged and is assembled correctly. Ensure all other parts of the breast pump are intact and correctly assembled. Finally, make sure the pump is properly positioned on your breast to create a good seal.
General| Brand | Philips |
|---|---|
| Model | SCF395/16 |
| Category | Breast Pump |
| Language | English |
To Next Page