Philips SD700 - Listen to FM Radio; Tune to FM Radio Stations; Select Preset Radio Station; Listen Through Headphones

8 EN
4 Play
Play from Bluetooth-enabled
devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
• Make sure that your Bluetooth device is compatible
with this product.
• Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
• The product can memorize a maximum of 4 paired
devices.Thefthconnecteddevicewillreplacethe
rstone.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• Any obstacle between this product and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
• The operational range between this product and a
Bluetoothdeviceisapproximately10meters(30feet).
1 Press SRC repeatedly to select Bluetooth
source.
» [bt] is displayed, and the Bluetooth
indicatorashesblueslowly.
2 Press and hold PAIRING until you hear
beep sound.
» The product is ready for pairing.
» TheBluetoothindicatorashesblue
quickly.
3 On your Bluetooth device, enable
Bluetooth and search for Bluetooth
devices.
4 Select [Philips SD700] on your device to
start pairing and connection. If necessary,
enter default password “0000”.
» After successful connection, the
speaker beeps twice, and the
Bluetoothindicatorstopashing.
Bluetooth indicator Status
Flashing blue quickly Ready for pairing a new
device
Flashing blue slowly Trying to connect a
paired device
Solid blue Connected
To disconnect the Bluetooth-enabled device:
• Press and hold PAIRING for three seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
» The product beeps twice, and the
Bluetoothindicatorashesblue.
To reconnect the Bluetooth-enabled device:
• Next time when this product enters
Bluetooth mode, it will reconnect the last
connected device automatically; or
• On your Bluetooth device, select "Philips
SD700" on your Bluetooth menu to start
connection.
To connect another Bluetooth-enabled device:
1 Press and hold PAIRING for three seconds
to disconnect the currently connected
device.
» The product enters Bluetooth pairing
mode.
2 Connect another Bluetooth device.
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the product.
• To pause or resume play, press PAIRING.