Philips SimplyGo Quick Start Guide

Control panel display
1. Power Turns SimplyGo on and off
2. Alarm silence Turns the audible alarm off
3. Mode Selects one of the three possible operating modes
4. Display screen Shows information about the operating
status of the device
5. Plus (+)/minus (-) + Increases the displayed setting;
- Decreases the displayed setting
6. Cannula connector Oxygen output and connection
point for cannula
1 2 3 4 5 6

Philips SimplyGo Specifications

General

Weight	10 lbs (4.5 kg) with battery
Dimensions	11.5 in x 10 in x 6 in (29.2 cm x 25.4 cm x 15.2 cm)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Flow Settings	Continuous flow and pulse dose settings
Maximum Oxygen Output	2 LPM continuous flow
Power Source	AC, DC, or rechargeable battery
Operating Altitude	Up to 10, 000 feet (3048 meters)
Humidity Range	15% to 95% (non-condensing)
Charging Time	Approximately 2 to 3 hours