Need help?Do you have a question about the Philips Respironics SimplyGo and is the answer not in the manual?
General| Weight | 10 lbs (4.5 kg) with battery |
|---|---|
| Continuous Flow Setting | 0.5, 1, 1.5, 2 LPM |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Oxygen Flow | Continuous Flow and Pulse Dose |
| Pulse Dose Setting | 1, 2, 3, 4, 5, 6 |
| Power Source | AC/DC power supply, rechargeable battery |
| Dimensions | 11.5 in x 10 in x 6 in |
| Operating Modes | Continuous flow, pulse dose |
| Battery Type | Lithium Ion |
| AC Power Input | 100-240 VAC, 50/60 Hz |
| DC Power Input | 11.5 to 16 VDC |
| Humidity Range | 15% to 95% non-condensing |
| Altitude Range | Up to 10, 000 ft (3048 m) |
| Warranty | 3 years |
Portable oxygen concentrator for prescription use by patients requiring supplemental oxygen.
Provides warnings about device operation, modifications, and patient care.
Highlights potential damage to the device from improper use or handling.
Details battery operating times for different modes and settings.
Details how to power the device using battery, AC power, or DC power.
Describes the different operating modes: Pulse, Continuous Flow, and Sleep.
Step-by-step guide on how to properly turn off the SimplyGo device.
Details technical alarms like No Breath Alarm and their causes/solutions.
Instructions for cleaning and disinfecting the device and its rechargeable battery.
To Next Page
