Philips SimplyGo User Manual

1083703
1069062 R04
JH 8/27/12
EN-INTL
SimplyGo
USER MANUAL

Philips SimplyGo Specifications

General

Weight	10 lbs (4.5 kg) with battery
Dimensions	11.5 in x 10 in x 6 in (29.2 cm x 25.4 cm x 15.2 cm)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Flow Settings	Continuous flow and pulse dose settings
Maximum Oxygen Output	2 LPM continuous flow
Power Source	AC, DC, or rechargeable battery
Operating Altitude	Up to 10, 000 feet (3048 meters)
Humidity Range	15% to 95% (non-condensing)
Charging Time	Approximately 2 to 3 hours

Summary

Introduction

Intended Use

Philips Respironics SimplyGo intended use for prescription oxygen.

Contraindications

Conditions where the SimplyGo device is not intended for use.

Device and Accessories Description

Overview of the SimplyGo concentrator, its features, and included accessories.

SimplyGo System Components

Included Accessories

Lists the carrying case, accessory bag, mobile cart, and power supplies as part of the system.

Device and Manual

Includes the SimplyGo device, rechargeable battery, and user manual.

Safety Information

Warnings

Important safety information representing potential harm to the operator or patient.

Safety Information (Continued)

Cautions

Lists potential equipment damage scenarios and necessary precautions for safe operation.

Symbol Key

Instructional Symbols

Symbols indicating instructions for use, no smoking, no oil/grease, and keep away from flames.

Device Classification Symbols

Symbols for Class II insulation, DC/AC power, drip-proof, and disposal.

Identification Symbols

Symbols for model number, serial number, and applied part type.

Battery and Power Symbols

Symbols representing rechargeable battery, AC power, and DC power.

Getting Started

Battery Duration Times

Provides approximate battery durations for different flow settings and operating modes.

System Overview and Components

Device Components Identification

Identifies key components of the SimplyGo device like control panel, vents, and connectors.

Control Panel Functions

Device Operation Buttons

Explains the functions of Power, Alarm Silence, and Mode buttons.

Display and Setting Adjustment

Details the display screen and the use of +/- buttons for setting adjustments.

Inserting and Removing the Batteries

Battery Gauge Check

Explains how to check the battery charge level using the LEDs on the battery.

Battery Insertion and Power-On

Correct Battery Insertion

Step-by-step guide on how to correctly insert the battery into the device.

Power Key Operation and Verification

Describes the expected device response after pressing the power key.

Charging the Battery

AC Power Supply Charging

Details the steps to connect and charge the battery using the AC power supply.

Operating the Device

Powering the Device

Outlines the options for powering the device: battery, AC, and DC power.

Device Operation Modes

Device Warm-Up Breathing

Explains the device's warm-up breathing process upon startup.

Pulse Mode Screen

Describes the Pulse operating mode and how it delivers oxygen based on breathing.

Device Operation Modes (Continued)

Continuous Flow and Sleep Modes

Explains Continuous Flow and Sleep modes and their settings.

Selecting Operating Modes

Details how to use the Mode button to select the desired operating mode.

Starting and Settings

Starting the SimplyGo Device

Provides step-by-step instructions on how to connect the cannula and start the device.

Device Settings and Operation

Display Screens and Flow Setting

Explains introductory screens and how to adjust the oxygen flow rate.

Turning the Device Off

Powering Down the Device

Details the steps to turn off the device using the power button.

Backlight Adjustment

Explains how to adjust backlight intensity using the Plus/Minus keys.

Alarm Indicators and Screen Symbols

Breath and Oxygen Alarms

Describes the No Breath and Low Oxygen Concentration Alarms.

Alarm Indicators and Screen Symbols (Continued)

Device Performance Alarms

Explains High Breath Rate and Technical Fault Alarms.

Alarm Indicators and Screen Symbols (Continued)

Battery and Flow Alarms

Describes Low Battery, No Flow, and Depleted Battery Alarms.

Alarm Silence Symbol

Explains the symbol indicating the alarm has been silenced.

Alarm Indicators and Screen Symbols (Continued)

Attention and Charging Symbols

Explains Attention and Battery Charging While Almost Empty symbols.

Alarm Indicators and Screen Symbols (Continued)

Battery and Power Status Symbols

Describes Battery Charging (Partial/Full) and Power Connection symbols.

Alarm Indicators and Screen Symbols (Continued)

Mode and Pulse Indicators

Explains On/Off, Pulse, Pulse Mode, and Sleep Mode indicators.

Alarm Indicators and Screen Symbols (Continued)

Continuous Flow and Setting Indicators

Explains Continuous Flow indicator, Flow Control setting, and AC Power warning.

Troubleshooting

Device Power and Oxygen Flow Issues

Lists causes and solutions for device not turning on or triggering oxygen pulses.

Concentration and Alarm Issues

Lists causes and solutions for oxygen concentration issues and general alarms.

Battery Care and Storage

Battery Handling and Storage

Provides guidelines for handling and storing the battery to maintain performance.

Connecting the Optional Humidifier

Humidifier Connection Warnings

Lists warnings related to connecting and using the humidifier.

Caring for your SimplyGo System

Cleaning the Device and Battery

Provides instructions for cleaning the device exterior and rechargeable battery.

Cleaning Accessories and Device Storage

Accessory Cleaning

Gives instructions for cleaning the carrying case, mobile cart, and power cords.

Cannula, Storage, and Disposal

Advises on cannula care, device storage, and proper disposal.

Portable Oxygen Concentrator Mobility

Using the SimplyGo Carrying Case

Explains how to place the SimplyGo device into its carrying case correctly.

System Accessories and Travel

Accessory Bag and Mobile Cart

Describes the accessory bag and how to use the mobile cart.

Traveling With Your System

Provides advice for traveling with the SimplyGo system, including packing.

Travel Considerations

Vehicle and Public Transport Use

Covers using the device in motor vehicles and on public transport.

On Arrival Procedures

Advises checking battery status and recharging upon arrival at the destination.

Technical Specifications

Operating and Storage Conditions

Lists operational temperature, humidity, altitude, and storage requirements.

Oxygen Delivery Specifications

Details oxygen concentration, flow settings, and pulse volumes for different modes.

Device and Battery Specifications

User Interface and Physical Specs

Covers device dimensions, weight, sound level, and user interface.

Power and Battery Details

Provides specifications for the battery, AC power, and DC power.

Standards and Classification

Standards Compliance

Lists the standards to which the device is designed to conform.

Device Classification

Details the device's classification, including IP rating and suitability for environments.

EMC Information

Electromagnetic Emissions and Immunity

Provides guidance on electromagnetic emissions and immunity compliance.

EMC Information (Continued)

RF Communication Equipment Separation

Details recommended separation distances for RF communication equipment.

Limited Warranty

Warranty Coverage and Limitations

Outlines the warranty period, coverage, limitations, and exclusions.