Philips SimplyGo User Manual

9
SimplyGo User Manual
Control Panel
Item Description Function
1 Power TurnsthedeviceOnandO
2 Alarm Silence Turnstheaudiblealarmo
3 Mode Selects one of the three possible operating
states of the device
4 Display Screen Shows information about the operating
status of the device
5 Plus (+)/Minus (–) + Increases the displayed setting; – Decreases
the displayed setting
6 Patient Cannula
Connector
Oxygen output and connection point for
patient cannula
Run Time Screen Description
Item Symbol Description Function
1 Operating Mode Fordetaileddescriptions,referto
the “Alarm Indicator and Screen
Symbols” section�
2 Battery Status
3 Setting
4 Breath Indicator
5 External Power Status
6 Audible Alarm Status
7 Alarm Type

Philips SimplyGo Specifications

General

Weight	10 lbs (4.5 kg) with battery
Dimensions	11.5 in x 10 in x 6 in (29.2 cm x 25.4 cm x 15.2 cm)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Flow Settings	Continuous flow and pulse dose settings
Maximum Oxygen Output	2 LPM continuous flow
Power Source	AC, DC, or rechargeable battery
Operating Altitude	Up to 10, 000 feet (3048 meters)
Humidity Range	15% to 95% (non-condensing)
Charging Time	Approximately 2 to 3 hours