Philips SimplyGo - Alarm Indicators and Screen Symbols (Continued); Continuous Flow and Setting Indicators

25
SimplyGo User Manual
Visual, Audio
Indicators
Description What To Do
Continuous Flow Mode
Indicator
This symbol appears when
the device is operating in
ContinuousFlowMode.
If this is your Mode
setting, no action is
needed�
If this is not your
Mode setting, press
the Mode button until
your proper Mode
setting appears�
1 short beep
Flow Control Setting
The large number on the
right side of the screen
shows the oxygen ow
setting� (In this example,
it is 2�) This number
can range from 1 to 6 in
increments of one-half for
Pulse and Sleep modes
and from �5 to 2 for
ContinuousFlowmode.
If this is your ow
setting, no action is
needed�
If this is not your ow
setting, press the +
button to increase this
number or press the –
button to decrease this
number�
AC Power Required
Warning
The screen appears
when your device is
in Sleep Mode and AC
power has not been
connected or has become
disconnected�
Connect your device to
an AC power source�