Philips SimplyGo - Alarm Indicators and Screen Symbols (Continued); Mode and Pulse Indicators

24
SimplyGo User Manual
Visual, Audio
Indicators
Description What To Do
1st press of the
Power button
= 1 long beep�
2nd press of the
Power button to
turndeviceOFF
= 3 long beeps
On/O Symbol
This symbol appears
when the device is
powered on, or is ready
tobeturnedonoro.
Press the Power
button to turn the
deviceonoro.
Note: To prevent
inadvertent starts
and stops, the device
requires two presses
of the Power button
toturnitonando.
Pulse Symbol
The dot appears in
the lower, right hand
corner of the display
screen when the
device delivers a pulse,
whenever you take a
breath�
No action needed�
Pulse Mode Indicator
This symbol appears
when the device is
operating in Pulse
mode�
If this is your Mode
setting, no action is
needed�
If this is not your
Mode setting, press
the Mode button until
your proper Mode
setting appears�
Sleep Mode Indicator
This symbol appears
when the device is
operating in Sleep
mode�
If this is your Mode
setting, no action is
needed�
If this is not your
Mode setting, press
the Mode button until
your proper Mode
setting appears�