Philips sonicare 2000 Series - Intensities; Getting Started; Charging your Cordless Power Flosser

11
English
Intensities
×3
×1
×2
Your Cordless Power Flosser comes with three different
intensity settings. To change the intensity to the setting
you prefer, press the intensity button.
Note: It is recommended to start using this Power Flosser
on the lowest intensity and increase the intensity over the
course of a few weeks.
Getting Started
Charging your Cordless Power Flosser
1
Gently pull and rotate the charging port cover on the
back of the Cordless Power Flosser to expose the
charging port .
2
Plug the USB-A cable into the charging port on the
back of the Cordless Power Flosser.
Note: Make sure the handle is completely dry before
you connect the USB-A cable.
1
2
3
Connect the USB-A cable into a 5V USB wall adapter.
Note: Wall adapter not included in all models. Only
use a 5V IPX4 adapter.