Philips sonicare 2000 Series - Replacement

18
English
1
2
1
Twist reservoir to detach.
2
1
2
Remove the nozzle by pressing the nozzle eject
button on the back of the handle.
3
Insert bottom of nozzle into the bottom of the Power
Flosser.
2
1
4
Twist the reservoir to reattach.
Note: Be sure to dry the inside of the reservoir and the
nozzle prior to using this functionality.
Note: To facilitate drying, keep the reservoir side fill port
door open or leave the Cordless Power Flosser
disassembled between uses.
Note: If you are not going to use the product for an
extended period of time, unplug it from the electrical
outlet, clean it and store it in a cool and dry place away
from direct sunlight.
Warning: Do not place other items in the
reservoir. In particular, do not store the charging
cord or wall adapter in the reservoir
Replacement
Replace nozzles every 6 months or immediately when
damaged. To buy accessories or spare parts, visit
philips.com or go to your local Philips Sonicare dealer.