Philips sonicare 2000 Series - Filling the Reservoir

12
English
4
The battery indicator flashes while charging (see
'Charging').
Note: It can take up to 8 hours to fully charge the battery,
but you can use the Cordless Power Flosser before it is
fully charged.
Note: Replace the charging port cover on the Cordless
Power Flosser when not actively charging.
Filling the Reservoir
Fill the reservoir with lukewarm water. There are two easy
ways to fill the reservoir.
Note: When filling reservoir, do not exceed the max fill
line.
Note: Remove the charger from the Cordless Power
Flosser prior to filling the reservoir and using the device.
Option 1:
Lift the flip top to the side of the reservoir and fill the
reservoir through the quick side fill port.
Option 2:
1
2
1
Twist to detach the reservoir and fill the reservoir
through the wide mouth opening.
2
Fill the reservoir.
2
1
3
Twist the reservoir to reattach.