15
English
Cleaning Orthodontic Brackets with the Quad Stream Nozzle
1
To clean around orthodontic brackets, place the
nozzle tip over each bracket.
2
Gently rotate the nozzle tip around the bracket in a
small circle before moving to the bracket on the next
tooth.
After each use
1
Turn off the Cordless Power Flosser.
2
Detach and Empty the reservoir
3
Remove the nozzle from the handle by pushing the
nozzle release button on the top of the handle
4
Rinse the nozzle under the tap
5
Dry any excess water from the nozzle, the outside of
the handle, and the reservoir
6
Insert the nozzle back into the handle or utilize the in-
reservoir nozzle storage feature (see 'Storage').
Note: To facilitate drying, keep the reservoir side fill port
door open or leave the Cordless Power Flosser
disassembled between uses.
Charging
Battery Status
This Cordless Power Flosser is designed to provide at least
25 flossing sessions, each session lasting 1 minute.
To Next Page
Loading...
