Requested data Command data Description
Response data
•
~
!ingmode
"M
?"
Ask current operating mode .
Response:
"Mn"
Mode n
is
selected.
Example:
"
M2
"
Selected
operating mode
2.
0
Trigger-mode
"
TAG?"
Read current trigger-mode.
Response:
"TAG
R"
Trigger if ready mode.
"TAG
U"
Trigger unconditional mode.
•
Execution mode
"E
?"
Ask current execution mode.
Response:
"E
U"
Execute Unconditional mode.
"
EX"
Execute
on
"X" mode.
"E
T"
Execute
on
trigger mode.
•
Ready-line
control mode
"R
?"
Ask ready-line control mode.
Response:
"R E"
Ready-line control Enabled.
"R D"
Ready-line control Disabled.
0
Event mask
" MSK ?"
Read current System
21
event
Response:
" MSK "+ < 9 digits>
mask. Indicates which events set
the abnormal bit (AB) together with
the EF3 bit
in
the Serial Poll byte.
digits:
"1"
A slave had a power fail , received
a power-on reset or received
an
illegal code or illegal sequence.
"2"
An
addressed module is not
present.
"3"
All units became ready performing
the programmed actions.
"4"
All units are ready with the
received data and may receive
new data.
"5"
A unit has data available.
"6"
All units are ready with the block
or scan.
"
7"
A unit has a warning.
"8"
The ready-line became high (ready
true).
"9"
A trigger-pulse was captured
on
the trigger-line.
21
To Next Page
Loading...
