4 Use your
headphones
Connect the headphones
to your Bluetooth device
Turn on your mobile phone/
Bluetooth device.
turn the headphones on.
The blue LED is on for 1 second
The headphones are
reconnected to the last
connected mobile phone/
Bluetooth device automatically.
If the last one is not available,
the headphones will be in
pairing mode
Manage your calls and
music
On/off
Task Button Operation
Turn the
headphones
on
Power
button
Press and hold
for 2 seconds
Turn the
headphones
Power
button
Press and hold
for 4 seconds
The blue
LED is on
for 1 second
If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature after
turning on the headphones, you have to
reconnect the headphones and mobile
phone/Bluetooth device manually.
If the headphones fail to connect to any
Bluetooth device within range in 5 minutes,
battery life.
Note
Tip
1
2
Note
When streaming audio from Device 1, receiving
a call from Device 2 will automatically pause
Device 1 playback. And the call will be routed
automatically to headphones.
Ending the call will automatically resume
playback from device 1.
Multi-point connection
Pairing
• Pairing the headphones to two
devices, e.g. mobile phone and
notebook.
Switch between device
• At anytime, you can only listen to
music from one device. Another
device will be for phone call.
• Pause the audio from one device
and then start play audio from the
another device.
EN 7
To Next Page
Loading...
