Philips TAA7507 - Reset the Earpieces; Technical Data

12 EN
5 Reset the
earpieces
1
2
3
4
5
6
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAA7507 from the device list.

your Bluetooth device.
Return earpieces to charging box
and open the lid.
Press button on box twice.
Follow steps in “Use your earpieces-
connect the earpieces to your
Bluetooth device.”
Pair the earpieces with your
Bluetooth device, select Philips
TAA7507.
If you encounter any pairing or connection
issue, you can follow the following
procedure to reset your earpieces to
factory default settings.
If there is no response from the
earpieces, you can follow the below step
to reset the hardware of your earpieces.
Tap and hold multi-function touch for

6 Technical data
Music play time (ANC on) :
7 + 21 hours

8 + 24 hours
Standby time: 
Charging time: 2 hours
Lithium-ion battery 55 mAh on
each earpiece, Lithium-ion battery

Bluetooth version: 5.2

 
• A2DP (Advanced Audio

• AVRCP (Audio Video Remote

Supported audio codecs: LDAC, AAC,
SBC




(62.8 dBuV/m)

(33 feet)

USB-C port for charging
Wireless charging
Low battery warning: available
 
notice.
Note