Philips TAA7507 - Get Started; Charge the Battery

6 EN
3 Get started
Charge the battery
Charging Box
Earpieces
• The earpieces start charging and the
blue LED light goes on
• When the earpieces are fully charged,

Place the earpieces in the charging box.
Plug one end of the USB-C cable into the
charging box and the other end into the
power source.
 Before you use your headphones, place them in
the charging box and charge the battery for 2
hours for optimum battery capacity and
lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging. Connecting the

Note
 Normally, a full charge takes 2 hours (for the
earpieces or charging box) by USB cable.
Tip
 The charging box serves as a portable backup
battery for charging the earpieces. When the
charging box is fully charged, it will fully
recharge the earpieces 3 times.
Tip